Product: Management and Development
http://www.pmd.periodikos.com.br/article/doi/10.4322/pmd.2021.001
Product: Management and Development
Review Article

Understanding digital transformation in the manufacturing industry: a systematic literature review and future trends

Yasser Omar Abdallah, Essam Shehab, Ahmed Al-Ashaab

Downloads: 12
Views: 3370

Abstract

Digital transformation is one of the most evolving areas both in the research literature and in industrial applications. No doubt that this process will be crucial in the survival of any manufacturing organisation in the future, especially during the current COVID-19 crisis. This paper aims to present a review of the concept in the manufacturing industry through the literature currently available on the topic. The literature was classified, and the results of each study were analysed. From this review, six critical findings have been identified in this paper. First, this paper proposes a definition of Digital Transformation and its concept development in the manufacturing industry. Moreover, significant challenges that exist in the manufacturing industry in the implementation of the digital transformation process have been classified as well as the major enabling technologies that help to implement the Digital Transformation. Finally, the benefits of implementing Digital Transformation in the manufacturing industry and its impact on the manufacturing ecosystem have been highlighted. Following a comprehensive review of the literature, future research directions are formulated to identify abundant research opportunities.

Keywords

digital transformation, manufacturing, literature review

References

Agrawal, P., & Narain, R. (2018). Digital supply chain management: an overview. IOP Conference Series. Materials Science and Engineering, 455(1), 012074. http://dx.doi.org/10.1088/1757-899X/455/1/012074.

Ananyin, V., Zimin, K., Lugachev, M., Gimranov, R., & Skripkin, K. (2018). Digital organization: transformation into the new reality. Business Info, 2018(2), 45-54. http://dx.doi.org/10.17323/1998-0663.2018.2.45.54.

Anwer, N., Eynard, B., Qiao, L., & Maropoulos, P. (2019a). Editorial for the special issue on ‘smart manufacturing and digital factory.’. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 233(5), 1341. http://dx.doi.org/10.1177/0954405419842412.

Anwer, N., Eynard, B., Qiao, L., & Maropoulos, P. (2019b). Editorial for the special issue on ‘smart manufacturing and digital factory.’. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 233(5), 1341. http://dx.doi.org/10.1177/0954405419842412.

Ashrafian, A., Powell, D. J., Ingvaldsen, J. A., Dreyer, H. C., Holtskog, H., Schütz, P., Holmen, E., Pedersen, A. C., & Lodgaard, E. (2019). Sketching the landscape for lean digital transformation. FIP Advances in Information and Communication Technology, 566, 29-36. http://dx.doi.org/10.1007/978-3-030-30000-5_4.

Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020). Industry 4.0 technologies assessment: a sustainability perspective. International Journal of Production Economics, 229, 107776. http://dx.doi.org/10.1016/j.ijpe.2020.107776.

Benitez, G. B., Ayala, N. F., & Frank, A. G. (2020). Industry 4.0 innovation ecosystems: an evolutionary perspective on value cocreation. International Journal of Production Economics, 228, 107735. http://dx.doi.org/10.1016/j.ijpe.2020.107735.

Berghaus, S., & Back, A. (2016). Stages in digital business transformation: results of an empirical maturity study. In Mediterranean Conference on Information Systems (MCIS) (Vol. 22, pp. 1-17). Retrieved in 2021, March 5, from http://aisel.aisnet.org/mcis2016%0Ahttp://aisel.aisnet.org/mcis2016

Bharadwaj, A., El Sawy, O. A., Pavlou, P. A., & Venkatraman, N. (2013). Digital business strategy: toward a next generation of insights. MIS Quarterly: Management Information Systems, 37(2), 471-482. http://dx.doi.org/10.25300/MISQ/2013/37:2.3.

Borangiu, T., Trentesaux, D., Thomas, A., Leitão, P., & Barata, J. (2019). Digital transformation of manufacturing through cloud services and resource virtualization. Computers in Industry, 108, 150-162. http://dx.doi.org/10.1016/j.compind.2019.01.006.

Bordeleau, F. E., Mosconi, E., & de Santa-Eulalia, L. A. (2020). Business intelligence and analytics value creation in Industry 4.0: a multiple case study in manufacturing medium enterprises. Production Planning and Control, 31(2-3), 173-185. http://dx.doi.org/10.1080/09537287.2019.1631458.

Brennen, J. S., & Kreiss, D. (2016). “Digitization” and “digitalization” are two conceptual terms that are closely associated and often used interchangeably in a broad range of literatures. This entry argues that there is analytical value in explicitly making a clear distinction between thes. In K. B. Jensen, R. T. Craig, J. Pooley & E. W. Rothenbuhler (Eds.), The International Encyclopedia of

Communication Theory and Philosophy (pp. 1-11). Chichester: Wiley. https://doi.org/10.1002/9781118766804.wbiect111.

Cachada, A., Barbosa, J., Leitao, P., Alves, A., Alves, L., Teixeira, J., & Teixeira, C. (2019). Using internet of things technologies for an efficient data collection in maintenance 4.0. In Proceedings 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS 2019) (pp. 113-118). New York: IEEE. https://doi.org/10.1109/ICPHYS.2019.8780217.

Castelo-Branco, I., Cruz-Jesus, F., & Oliveira, T. (2019). Assessing Industry 4.0 readiness in manufacturing: evidence for the European Union. Computers in Industry, 107, 22-32. http://dx.doi.org/10.1016/j.compind.2019.01.007.

Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., & Georgoulias, K. (2009a). Digital manufacturing: history, perspectives, and outlook. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 223(5), 451-462. http://dx.doi.org/10.1243/09544054JEM1241.

Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., & Georgoulias, K. (2009b). Digital manufacturing: History, perspectives, and outlook. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 223(5), 451-462. http://dx.doi.org/10.1243/09544054JEM1241.

Cimini, C., Pinto, R., & Cavalieri, S. (2017). The business transformation towards smart manufacturing: a literature overview about reference models and research agenda. IFAC-PapersOnLine, 50(1), 14952-14957. http://dx.doi.org/10.1016/j.ifacol.2017.08.2548.

Cozmiuc, D., & Petrisor, I. (2018). Industrie 4.0 by siemens: steps made next. Journal of Cases on Information Technology, 20(1), 31-45. http://dx.doi.org/10.4018/JCIT.2018010103.

De Carolis, A., MacChi, M., Negri, E., & Terzi, S. (2018). Guiding manufacturing companies towards digitalization a methodology for supporting manufacturing companies in defining their digitalization roadmap. In Proceedings of the 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches (ICE/ITMC 2017) (pp. 487-495). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ICE.2017.8279925.

Demirkan, H., Spohrer, J. C., & Welser, J. J. (2016). Digital innovation and strategic transformation. IT Professional, 18(6), 14-18. http://dx.doi.org/10.1109/MITP.2016.115.

Dombrowski, U., & Fochler, S. (2018). Servitization as a key driver for digital transformation of manufacturing companies’ spare parts service. In Proceedings of the 2018 IEEE International Conference on Service Operations and Logistics, and Informatics, SOLI 2018 (pp. 291-296). New York: IEEE. http://dx.doi.org/10.1109/SOLI.2018.8476713.

Drake, E. (2019). Digital transformation. In 37th International Conference on Thermal Treatment Technologies and Hazardous Waste Combustors (IT3/HWC 2019). Pittsburgh: Air and Waste Management Association. https://doi.org/10.1353/jvc.0.0011.

El Hamdi, S., Oudani, M., & Abouabdellah, A. (2020). Morocco’s readiness to Industry 4.0. Smart Innovation, Systems and Technologies, 146, 463-472. http://dx.doi.org/10.1007/978-3-030-21005-2_44.

Fernández-Rovira, C., Álvarez Valdés, J., Molleví, G., & Nicolas-Sans, R. (2021). The digital transformation of business: towards the datafication of the relationship with customers. Technological Forecasting and Social Change, 162, 120339. http://dx.doi.org/10.1016/j.techfore.2020.120339.

Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019). Industry 4.0 technologies: implementation patterns in manufacturing companies. International Journal of Production Economics, 210, 15-26. http://dx.doi.org/10.1016/j.ijpe.2019.01.004.

Gökalp, E., Şener, U., & Eren, P. E. (2017). Development of an assessment model for industry 4.0: Industry 4.0-MM. Communications in Computer and Information Science, 770, 128-142. https://doi.org/10.1007/978-3-319-67383-7_10.

Hartley, J. L., & Sawaya, W. J. (2019). Tortoise, not the hare: digital transformation of supply chain business processes. Business Horizons, 62(6), 707-715. http://dx.doi.org/10.1016/j.bushor.2019.07.006.

Hausberg, J. P., Liere-Netheler, K., Packmohr, S., Pakura, S., & Vogelsang, K. (2019). Research streams on digital transformation from a holistic business perspective: a systematic literature review and citation network analysis. Journal of Business Economics, 89(8-9), 931-963. http://dx.doi.org/10.1007/s11573-019-00956-z.

Heavin, C., & Power, D. J. (2018). Challenges for digital transformation–towards a conceptual decision support guide for managers. Journal of Decision Systems, 27(Suppl. 1), 38-45. http://dx.doi.org/10.1080/12460125.2018.1468697.

Heikkila, M., Rattya, A., Pieska, S., & Jamsa, J. (2016). Security challenges in small-and medium-sized manufacturing enterprises. In 2016 International Symposium on Small-Scale Intelligent Manufacturing Systems (SIMS 2016) (pp. 25-30). New York: IEEE. http://dx.doi.org/10.1109/SIMS.2016.7802895.

Holmström, J., & Partanen, J. (2014). Digital manufacturing-driven transformations of service supply chains for complex products. Supply Chain Management, 19(4), 421-430. http://dx.doi.org/10.1108/SCM-10-2013-0387.

Horvath, D., Csontos, R. S., & Szabó, R. Z. (2018). Management aspects of smart manufacturing. In Proceedings of the 22nd World Multi-Conference on Systemics, Cybernetics and Informatics (WMSCI 2018) (Vol. 2, pp. 168-172). International Institute of

Informatics and Systemics. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0-85055857841&partnerID=40&md5=461c7fbdf9327bec8bab68f165b48c8c

Ismagilova, L. A., Gileva, T. A., Galimova, M. P., Sitnikova, L. V., & Gilev, G. A. (2019). The digital transformation trajectory of industrial enterprises. In Proceedings of the 33rd International Business Information Management Association Conference, IBIMA 2019: Education Excellence and Innovation Management through Vision 2020 (pp. 2033-2045). International Business Information Management Association. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0- 85074116005&partnerID=40&md5=e0a5aeac3e972b5bff726660b7215549

Kokolek, N., Jakovic, B., & Curlin, T. (2019). Digital knowledge and skills: key factors for digital transformation. Annals of DAAAM and Proceedings of the International DAAAM Symposium, 30(1), 46-53. http://dx.doi.org/10.2507/30th.daaam.proceedings.006.

Kolla, S., Minufekr, M., & Plapper, P. (2019). Deriving essential components of lean and industry 4.0 assessment model for manufacturing SMEs. Procedia CIRP, 81,753-758. https://doi.org/10.1016/j.procir.2019.03.189

Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018). Digital Twin in manufacturing: a categorical literature review and classification. IFAC-PapersOnLine, 51(11), 1016-1022. http://dx.doi.org/10.1016/j.ifacol.2018.08.474.

Kunii, Y., & Hasegawa, T. (2019). Fujitsu’s activities to support digital transformation. Fujitsu Scientific and Technical Journal, 55(1), 3-8. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0- 85061587212&partnerID=40&md5=c8ca5d87c9f6607f37418d00d7b9db08

Kutzner, K., Schoormann, T., & Knackstedt, R. (2018). Digital transformation in information systems research: A taxonomy-based approach to structure the field. In 26th European Conference on Information Systems: Beyond Digitization - Facets of SocioTechnical Change, (ECIS 2018). Association for Information Systems. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0-85054933884&partnerID=40&md5=e4a72be6d291fb8f191b89dd1da534af

Laird, K. (2017). Understanding the Digital Transformation Called Industry 4.0. Plastics Engineering, 73(1), 24-28. http://dx.doi.org/10.1002/j.1941-9635.2017.tb01637.x.

Lee, C., Leem, C. S., & Hwang, I. (2011). PDM and ERP integration methodology using digital manufacturing to support global manufacturing. International Journal of Advanced Manufacturing Technology, 53(1–4), 399-409. http://dx.doi.org/10.1007/s00170-
010-2833-x.

Li, Y., Liu, C., & Gao, J. (2018). Special issue on digital enterprise technologies in manufacturing. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 232(13), 2251-2252. http://dx.doi.org/10.1177/0954405418774602.

Loonam, J., Eaves, S., Kumar, V., & Parry, G. (2018). Towards digital transformation: lessons learned from traditional organizations. Strategic Change, 27(2), 101-109. http://dx.doi.org/10.1002/jsc.2185.

Mittal, S., Khan, M. A., Romero, D., & Wuest, T. (2019). Smart manufacturing: Characteristics, technologies and enabling factors. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 233(5), 1342-1361. http://dx.doi.org/10.1177/0954405417736547.

National Archives of Australia. (2011). Digital continuity plan. In 19th International Conference on Computer Applications in Shipbuilding (ICCAS 2019) (Vol. 1, pp. 1–13). London: Royal Institution of Naval Architects. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0-85074455236&partnerID=40&md5=51747f4e12df98a8b7a3343e2c28bedf

Ng, H. Y., Tan, P. S., & Lim, Y. G. (2019). Methodology for digitalization: a conceptual model. In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 1269-1273). New York: IEEE. https://doi.org/10.1109/IEEM.2018.8607457.

Nwankpa, J. K., & Roumani, Y. (2016). IT capability and digital transformation: a firm performance perspective. In 2016 International Conference on Information Systems (ICIS 2016). Dublin, Ireland.

Osterrieder, P., Budde, L., & Friedli, T. (2020). The smart factory as a key construct of industry 4.0: a systematic literature review. International Journal of Production Economics, 221, 107476. http://dx.doi.org/10.1016/j.ijpe.2019.08.011.

Paavola, R., Hallikainen, P., & Elbanna, A. (2017). Role of middle managers in modular digital transformation: the case of Servu. In Proceedings of the 25th European Conference on Information Systems (ECIS 2017) (pp. 887-903). Guimarães, Portugal.

Paritala, P. K., Manchikatla, S., & Yarlagadda, P. K. D. V. (2017). Digital manufacturing: applications past, current, and future trends. Procedia Engineering, 174, 982-991. https://doi.org/10.1016/j.proeng.2017.01.250

Parra, D. T., Angulo, L., Sandoval, J., & Guerrero, C. D. (2019). Digital transformation in Colombia: An exploratory study on ICT adoption in organizations. In 2019 14th Iberian Conference on Information Systems and Technologies (CISTI). New York: IEEE Computer Society. https://doi.org/10.23919/CISTI.2019.8760608.

Peillon, S., & Dubruc, N. (2019). Barriers to digital servitization in French manufacturing SMEs. Procedia CIRP, 83, 146-150).
http://dx.doi.org/10.1016/j.procir.2019.04.008.

Piccinini, E., Hanelt, A., Gregory, R. W., & Kolbe, L. M. (2015). Transforming industrial business: the impact of digital transformation on automotive organizations. In 2015 International Conference on Information Systems: Exploring the Information Frontier (ICIS 2015). Elsevier. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0- 84964596864&partnerID=40&md5=a999f02e3572425f9c0403df979b9550

Qi, Q., & Tao, F. (2018). Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison. IEEE Access: Practical Innovations, Open Solutions, 6, 3585-3593. http://dx.doi.org/10.1109/ACCESS.2018.2793265.

Rojo Abollado, J., Shehab, E., & Bamforth, P. (2017). Challenges and benefits of digital workflow implementation in aerospace manufacturing engineering. Procedia CIRP, 60, 80-85. http://dx.doi.org/10.1016/j.procir.2017.02.044.

Schallmo, D., Williams, C. A., & Boardman, L. (2017). Digital transformation of business models-best practice, enablers, and roadmap. International Journal of Innovation Management, 21(8), 1740014. http://dx.doi.org/10.1142/S136391961740014X.

Schniederjans, D. G., Curado, C., & Khalajhedayati, M. (2020). Supply chain digitisation trends: an integration of knowledge management. International Journal of Production Economics, 220, 107439. http://dx.doi.org/10.1016/j.ijpe.2019.07.012.

SME Media Staff. (2017). Rolls-Royce’s PLM journey and growing digital transformation. Manufacturing Engineering, 159(3), 55-57. Retrieved in 2021, March 5, from https://www.scopus.com/inward/record.uri?eid=2-s2.0- 85032574223&partnerID=40&md5=94fa453dc95015784d645382f1651f6e

Tokody, D. (2018). Digitising the European industry: holonic systems approach. Procedia Manufacturing, 22, 1015-1022. http://dx.doi.org/10.1016/j.promfg.2018.03.144.

Tolkachev, S. A., Bykov, A. A., Morkovkin, D. E., Borisov, O. I., & Gavrilin, A. V. (2020). Digitalization of manufacturing in Russia, Belarus and the European Union. IOP Conference Series: Earth and Environmental Science, 421(3), 032041. http://dx.doi.org/10.1088/1755-1315/421/3/032041.

Ulas, D. (2019). Digital transformation process and SMEs. Procedia Computer Science, 158, 662-671. http://dx.doi.org/10.1016/j.procs.2019.09.101.

Vial, G. (2019). Understanding digital transformation: a review and a research agenda. The Journal of Strategic Information Systems, 28(2), 118-144. http://dx.doi.org/10.1016/j.jsis.2019.01.003.

Zangiacomi, A., Pessot, E., Fornasiero, R., Bertetti, M., & Sacco, M. (2020). Moving towards digitalization: a multiple case study in manufacturing. Production Planning and Control, 31(2-3), 143-157. http://dx.doi.org/10.1080/09537287.2019.1631468.


Submitted date:
10/13/2020

Accepted date:
02/01/2021

608ab6efa953952dfd5f5d42 pmd Articles
Links & Downloads

Product

Share this page
Page Sections